| D6975-63001 |
-Short wave Gigabit Interface Converter (GBIC) - 850nm - For 50um multimode fiber optic cables |
| P4640-69000 |
-Intel Pentium III processor - 1.13GHz (Tualatin, 133MHz FSB, 256K L2 cache) - Includes heat sink |
| P4643-69000 |
-Intel Pentium III processor - 1.26GHz (Tualatin, 133MHz FSB, 256K L2 cache) - Includes heat sink |
| D9387-63016 |
-Processor socket terminator module |
| P1810-63029 |
-Processor socket terminator module for Pentium III processors greater than 1.13GHz |
| P1824-63003 |
-Low Voltage Differential/Single-Ended SCSI terminator - Has high density 68-pin (F) connector for internal cable |
| D9872-63030 |
-Thermal heat sink pad |
| D2140A |
-NetRAID-1si - One-channel disk array controller - PCI board with one internal 68 pin high density and one external 68 pin high density Ultra wide SCSI connector |
| D5013B |
-PCI 10Base-T/100Base-TX LAN board |
| P2467-69001 |
-Intel Pentium III processor - 866MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) - Includes heat sink |
| P1824-63007 |
-LP2000R hot swap power supply |
| P1824-63044 |
-Secondary processor blower assembly - Mounts onto the primary processor fan |
| P1824-63047 |
-Primary fan/air flow guide for cooling the processor - Includes cable and housing |
| 5185-5452 |
-Heat sink for Pentium III processors greater than 1.13GHz |
| D6028-69002 |
-NetServer remote control board with 4 pin I2C cable |
| P1218-69002 |
-Top Tools remote control PC board (Version 2.0) - Allows emergency remote access using LAN or modem |
| P1824-63039 |
-Ultra3 SCSI backplane kit - Each PC board has three 80-pin SCA SCSI connectors on one side and two 68-pin SCSI connectors and one power connector on the other side - Kit contains two backplanes |
| P1824-69027 |
-Embedded Remote Assistance card |
| P1824-69032 |
-System processor board - Has two processor sockets - For Pentium III processors greater than 1.13GHz |
| D5955A |
-NetRAID-3si three-channel disk array controller - PCI board with three internal 68 pin high density and three external 68 pin high density Ultra wide SCSI connectors |
| D6028A |
-TopTools remote control card with battery (Version 1) - Allows emergency remote access using LAN or modem |
| D9351-69004 |
-NetRaid-4M four-channel disk array controller W/128MB cache - PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors |
| P2510-63001 |
-LAN adapter - 3COM 10/100Base-T PCI network interface card |
| P2511-63001 |
-LAN adapter - Intel dual port 10/100Base-T LAN card |
| P2512-69001 |
-LAN adapter - Intel gigabit network interface card |
| P3410-69003 |
-NetRaid-1M single-channel Ultra3 SCSI disk array controller W/32MB cache - PCI board with one internal 68-pin High Density and one external 68-pin Very High Density Ultra3 SCSI connector |
| P3411-69004 |
-NetRaid-2M dual-channel disk array controller W/64MB cache - PCI board with two internal 68-pin High Density and two external 68-pin Very High Density Ultra3 SCSI connectors |
| P3413-63001 |
-Ultra160 LVD SCSI adapter board (Adaptec ASC-29160) - 64-bit, 66MHz PCI - External 68-pin High Density LVD connector, internal 68-pin Ultra160 LVD connector, internal 68-pin SE connector, internal 50-pin Narrow SE connector |
| P3475-69003 |
-NetRaid-2M dual-channel disk array controller W/128MB cache - PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors |
| D9161-69004 |
-NetRaid-4M four-channel disk array controller W/64MB cache - PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors |
| D8602-69002 |
-Tachyon TL fiber channel host bus adapter - Controller PC board for clustering fiber channel devices |
| D8602A |
-Fiber channel host bus adapter - Controller PC board for clustering fiber channel devices |
| D9161A |
-NetRAID-4m four-channel disk array controller with 64MB cache - PCI board with two internal 68 pin high density and four external 68 pin very high density Ultra3 SCSI connectors |
| D9351A |
-NetRAID-4m four-channel disk array controller with 128MB cache - PCI board with two internal 68 pin high density and four external 68 pin very high density Ultra3 SCSI connectors |
| P1218A |
-TopTools remote control card with battery (Version 2.0) - Allows emergency remote access using LAN or modem |
| P3482A |
-Gigabit LAN adapter - PCI-X 10/100/1000TX 3Com LAN card - (3Com 3C996-T) |
| D2140-69004 |
-NetRaid-1Si one-channel disk array controller - PCI board with one internal 68-pin High Density and one external 68-pin Ultra High Density SCSI connector |
| D5013-63003 |
-LAN adapter - PCI 10/100Base-TX LAN board |
| D5955-69001 |
-NetRaid-3Si three-channel disk array controller - PCI board with three internal 68-pin High Density and three external 68-pin High Density Uultra Wide SCSI connectors |
| P1824-63033 |
-PCI cage assembly - Has three PCI slots - Includes the PCI backplane PC board and cooling fan |
| P1824-63036 |
-SCSI backplane power cable kit |
| P1824-63019 |
-LED cable kit - Includes two SCSI and power cables with LEDS |
| P2474-69001 |
-36.4GB hot-swap Ultra3 SCSI hard drive module - 10,000 RPM - Includes drive mounted on hot-swap tray |
| P2507-69001 |
-18GB hot-swap Ultra3 SCSI 80-PIN SCA hard drive module - 15,000 RPM (Seagate - ST318451LC) - Includes drive mounted on low profile hot-swap tray |
| P2472A |
-9.1GB hot-swap Ultra3 SCSI hard drive module - 10,000 RPM, low profile |
| P2473A |
-18.2GB hot-swap Ultra3 SCSI hard drive module - 10,000 RPM, low profile |
| P2474A |
-36.4GB hot-swap Ultra3 SCSI hard drive module - 10,000 RPM, low profile |
| P2507A |
-18.2GB hot-swap Ultra3 SCSI hard drive module - 15000 RPM, low profile |
| P2452A |
-Hot-swap drive tray - For mounting third party drives in HP NetServer LP1000r, LP2000r |
| D8265-69001 |
-128MB, 133MHz ECC SDRAM DIMM memory module |
| P2473-69001 |
-18.2GB hot-swap Ultra3 SCSI hard drive module - 10,000 RPM |
| P2472-69001 |
-9.1GB hot-swap Ultra3 SCSI hard drive module - 10,000 RPM - Includes drive mounted on hot-swap tray |
| P1824-63023 |
-Bracket kit - For Telco rack mounting |
| P1824-63031 |
-Power supply cage housing |
| P1824-63035 |
-Top cover assembly - Includes the technical reference label |
| P1824-63020 |
-Power supply filler - Required for empty power supply slots |
| P1824-63022 |
-Front panel hot-swap hard drive bay filler |
| J1527-63001 |
-Rack slide and management cable kit - For standard two post and standard four post racks |
| D4384-63003 |
-IDE CD-ROM drive - 48X CD-ROM read |
| P1810-63019 |
-1.44MB, 3.5-inch slimline floppy disk drive |
| D8266-69001 |
-256MB, 133MHz ECC SDRAM DIMM memory module |
| D8267-69001 |
-512MB, 133MHz ECC SDRAM DIMM memory module |
| D8520-63012 |
-3.0V battery - Lithium - Type CR2032 |
| P1218-63000 |
-Lithium-ion battery for Top Tools Remote Control Board (Version 2.0) |
| 5183-6569 |
-I2C cable - Has 4-pin connectors |
| P1810-63036 |
-Ultra3 SCSI cable with twisted pair segments - Has two 68-pin (M) connectors - 51.7cm (20.4in) long |
| P1824-63012 |
-IDE CD-ROM drive cable - Has two 40-pin (F) connectors - 10.5cm (4.1in) long |
| P1824-63013 |
-Ribbon cable - Has two 26-pin (M) edge connectors - 34.5cm (13.6in) long |
| P1824-63041 |
-Ultra3 SCSI cable with twisted pair segments - Has two 68-pin (M) connectors - 78.7cm (31in) long |
| P1810-63009 |
-Ultra-3 SCSI ribbon cable kit - Includes two mounting screws and one cable - Cable has one 68-pin (M) connector and one external very high density (VHDCI) 68-pin (F) connector - 34.3cm (13.5in) long |
| 5183-6570 |
-4.8V battery - 1.1Ah, nickel metal hydride (NiMH) battery for NetServer remote control board - Includes cable and mounting fasteners |
| P2468A |
-Intel Pentium III Processor upgrade - Includes one 933MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) processor and heat sink |
| D8268-69001 |
-1GB, 133MHz ECC SDRAM DIMM memory module |
| D8265A |
-128MB, 133MHz ECC SDRAM DIMM memory module |
| D8266A |
-256MB, 133MHz ECC SDRAM DIMM memory module |
| D8267A |
-512MB, 133MHz ECC SDRAM DIMM memory module |
| D8268A |
-1GB, 133MHz ECC SDRAM DIMM memory module |
| P2498A |
-LP2000R redundant hot-swap power supply - 400 watts - Includes power cord |
| P2453A |
-Intel Pentium III Processor upgrade - Includes one 1000MHz (Coppermine, 256KB Level-2 cache) processor and heat sink |
| P2467A |
-Intel Pentium III Processor upgrade - Includes one 866MHz (Copperminem, 133MHz front side bus, 256KB Level-2 cache) processor and heat sink |
| P1824-63004 |
-Front bezel |
| D6975A |
-Short wave Gigabit Interface Converter (GBIC) - 850nm - For 50um multimode fiber optic cables |
| 5065-7470 |
-HP NetServer Navigator CD-ROM (Revision M.04.05) |
