| D8551A |
-Redundant power supply module - 300 watts - Includes secondary fan tray |
| C5726AR |
-80GB SureStore DLT80E Low Voltage Differential SCSI external DLT drive |
| C6280F |
-SureStore 418 8 slot DLT autoloader - Includes one Ultra SCSI DLT 4000 drive, six cartridge magazines, SCSI cable and terminator, and five data cartridges |
| D4911A |
-9.1GB Ultra Wide SCSI hard drive module - 7,200 RPM |
| D7049A |
-9.1GB Ultra Wide SCSI hard drive - 10,000 RPM, 3.5-inch form factor |
| D7176A |
-18.2GB Ultra Wide SCSI hard drive - 7,200 RPM, 3.5-inch form factor |
| C1354A |
-SureStore H/A tape array 5500 - Rack mount enclosure for up to five DLT80m DLT drives - With rail kit, install guide, users manual, two power cables, and four 0.5m (1.6ft) long SCSI cables |
| C1354AR |
-SureStore H/A tape array 5500 - Rack mount enclosure for up to five DLT80m DLT drives - With rail kit, install guide, users manual, two power cables, and four 0.5m (1.6ft) long SCSI cables |
| C1556D |
-24GB external SureStore DAT 24e Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive |
| C5726A |
-80GB SureStore DLT80E Low Voltage Differential SCSI external DLT drive |
| C5697A |
-20/40GB hot-swap SureStore DLT40r removable DLT drive - Includes manuals, software on a CD-ROM, DLT tape IV media, and cleaning cartridge |
| C1559D |
-6x12/24GB external SureStore DAT 24x6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive |
| C1559DR |
-6x12/24GB external SureStore DAT 24x6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive |
| C1579A |
-20/40GB external SureStore DLT 40e Single-Ended Narrow SCSI-2 DLT tape drive |
| C1579AR |
-20/40GB external SureStore DLT 40e Single-Ended Narrow SCSI-2 DLT tape drive |
| C5647A |
-20/40GB SureStore DLT 40i Single-Ended Narrow SCSI-2 internal DLT drive |
| C5677B |
-6x12/24GB SureStore DAT 24x6i Single-Ended Narrow SCSI-2 internal autoloader DDS-3 (DAT) tape drive |
| C5687A |
-20/40GB SureStore DAT40e external DDS-4 tape drive |
| C5687AR |
-20/40GB SureStore DAT40e external DDS-4 tape drive |
| C5695A |
-HP SureStore Tape Rack Array - Includes rack mount enclosure for up to four removable drives, with rail kit, install guide, users manual, four power cables, two 2.5M (8.2ft) & one 0.9M (3.0ft) SCSI cable |
| D2198B |
-Hard drive mounting tray kit (package of 3) |
| D8267-69001 |
-512MB, 133MHz ECC SDRAM DIMM memory module |
| D8268-69001 |
-1GB, 133MHz ECC SDRAM DIMM memory module |
| D7155A |
-64MB, 100MHz, unbuffered ECC SDRAM DIMM memory module |
| D7156A |
-128MB, 100MHz, unbuffered ECC SDRAM DIMM memory module |
| D8265A |
-128MB, 133MHz ECC SDRAM DIMM memory module |
| D8266A |
-256MB, 133MHz ECC SDRAM DIMM memory module |
| D8267A |
-512MB, 133MHz ECC SDRAM DIMM memory module |
| D8268A |
-1GB, 133MHz ECC SDRAM DIMM memory module |
| D8266-69001 |
-256MB, 133MHz ECC SDRAM DIMM memory module |
| D8265-69001 |
-128MB, 133MHz ECC SDRAM DIMM memory module |
| D6127A |
-Hot swap drive tray - For half-height Ultra2 SCSI SCA disk drive |
| D6128A |
-Hot swap drive tray - For low-profile Ultra2 SCSI SCA disk drive |
| D2199A |
-Drive mounting tray kit - 5.25-inch wide tray for 5.25-inch removable media drives (and hard drives in some cases) - Package of 3 trays with instructions and screws |
| D8228-63044 |
-Hard drive adapter tray kit (Flint Gray) - For mounting 3.5-inch hard drive in 5.25-inch drive bay slot - Includes tray, front bezel, & status cable with LED |
| D6138A |
-AC adapter for Netserver TopTools remote control card |
| D6020A |
-SCSI interface cable - Low Voltage Differential/Ultra2 Single-Ended SCSI cable with thumbscrews on both ends - 68-pin ultra high density (M) to 68-pin high density (M) - 2.5m (8.2ft) long |
| D4282B |
-Cable kit - Two internal SCSI cables and one adapter - Used with HP NetRAID-3si disk array controller |
| D8264-69000 |
-64MB, 133MHz ECC SDRAM DIMM memory module |
| C1559C |
-6x12/24GB external SureStore DAT 24x6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive |
| C1556DR |
-24GB external SureStore DAT 24e Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive |
| C1555DR |
-24GB SureStore DAT 24i Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive |
| 5064-7906 |
-Cover - Installed over the I/O board side of the cabinet |
| 5064-4689 |
-Hot-swap drive bay filler panel with lock |
| 5002-5191 |
-Handles - For rack mount version |
| 5182-4534 |
-Key - Drive lock |
| D8228-63010 |
-Nameplate - NetServer PIII LH3000 logo (Pedestal configuration) |
| D8228-63011 |
-Nameplate - NetServer PIII LH3000 logo (Non-HP rack mount configuration) |
| D8228-63012 |
-Nameplate - NetServer PIII LH3000 logo (HP rack mount configuration) |
| 5063-8389 |
-5.25-inch filler panel (Quartz Gray) - For empty 5.25-inch drive bays above the Hot-Swap drive bay |
| 5064-4694 |
-Cover - Large cover installed on both sides of a pedestal version or top and bottom of a rack mount version |
| 5064-4693 |
-Cover - Installed over the system board side of the chassis |
| 5064-4639 |
-Front panel assembly bezel - Mounts over the control panel |
| 5064-9002 |
-Main bezel (rack mount version) - Low profile - Covers the front of the server |
| D8228-63019 |
-Front bezel - For pedestal configuration - Includes bezel lock |
| D8228-63036 |
-Main bezel (rack mount version) - Covers the front of the server |
| D8520-69003 |
-Internal drive capacity upgrade - Adds a secondary mass storage cage for up to six additional drive bays |
| 1490-1007 |
-5.08cm (2.0-in) swivel caster (with mounting plate) |
| 5182-9416 |
-Fixed caster (with locking lever) |
| 5042-2144 |
-Latch clip |
| D2035-60282 |
-1.44MB, 3.5-inch floppy drive (Flint Gray) - 1/3 height |
| D4384-63003 |
-IDE CD-ROM drive - 48X CD-ROM read |
| P1168-69003 |
-9.1GB hot-swap Ultra3 SCSI hard drive module - 10,000 RPM, low profile - Includes drive, hot-swap tray, SCA extender, and bezel spacer |
| P1169-69002 |
-36.4GB Ultra3 Wide SCSI LVD hard drive module - 10,000 RPM (Seagate ST336704LW) |
| P1213-69001 |
-9GB Ultra3 SCSI hard drive - 7,200 RPM, 3.5-inch form factor, 1.0-inch high |
| P1214-69002 |
-9GB Ultra3 SCSI hard drive module - 10000 RPM, 3.5in form factor, low profile |
| P1215-69001 |
-18GB Ultra3 SCSI hard drive - 7,200 RPM, 3.5-inch form factor, 1.0-inch high - Comes mounted on a drive tray |
| P1216-69001 |
-18.2GB hot-swap Ultra3 SCSI hard drive module - 7,200 RPM, low profile - Includes drive, hot-swap tray, SCA extender, and bezel spacer |
| P1217-69001 |
-9.1GB hot-swap Ultra3 SCSI hard drive module - 7,200 RPM, low profile - Includes drive, hot-swap tray, SCA extender, and bezel spacer |
| C1555D |
-24GB internal SureStore DAT 24i Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive (Flint) |
| P1167-69002 |
-18.2GB Ultra3 Wide SCSI LVD hard drive module - 10,000 RPM, 3.5-inch form factor, 1.0-inch high (Seagate ST318404LW) |
| D9421-69001 |
-18.2GB hot-swap Ultra3 SCSI hard drive module - 15,000 RPM, low profile - Includes drive, hot-swap tray, SCA extender, and bezel spacer |
| D4911-69001 |
-9.1GB Ultra Wide SCSI hard drive module - 7,200 RPM |
| D6106-69001 |
-9.1GB hot-swap Ultra2 SCSI hard drive module - 7,200 RPM, low profile - Includes drive, hot-swap tray, SCA extender, and bezel spacer |
| D6107-69001 |
-9.1GB hot-swap Ultra2 SCSI hard drive module - 10,000 RPM, low profile - Includes drive, hot-swap tray, SCA extender, and bezel spacer |
| D7049-69001 |
-9.1GB Ultra Wide SCSI hard drive module - 10,000 RPM |
| D7174-69000 |
-18GB hot-swap Ultra2 SCSI hard drive module - 7,200 RPM - Includes drive, hot-swap tray, SCA extender, and bezel spacer |
| D7175-69000 |
-18.2GB hot-swap Ultra2 SCSI hard drive module - 10,000 RPM - Includes drive, hot-swap tray, SCA extender, and bezel spacer |
| D7176-69001 |
-18.2GB Wide Single-Ended SCSI hard drive - 7,200 RPM |
| D9419-69002 |
-36.4GB hot-swap Ultra3 SCSI hard drive module - 10,000 RPM, low profile - Includes drive, hot-swap tray, SCA extender, and bezel spacer |
| 5064-6185 |
-Cable management arm - Supports cables behind server |
| D5991A |
-NetServer Rack Storage 12/FC - Fiber channel mass storage enclosure - Can hold 8 or 12 Ultra2 SCSI drives - Includes one copper fiber channel cable and one copper GBIC |
| P3413A |
-Ultra 160 LVD SCSI adapter board (Adaptec ASC-29160) - 64 bit, 66MHz PCI - External 68 pin high density LVD connector, internal 68 pin Ultra 160 LVD connector, internal 68 pin single-ended connector, internal 50 pin narrow single-ended connector |
| P3411A |
-NetRAID-2m dual channel disk array controller with 64MB cache - PCI board with two internal 68 pin high density and four external 68-pin very high density Ultra3 SCSI connectors |
| P3410A |
-Netraid-1m single channel disk array controller with 32MB cache - PCI board with two internal 68 pin high density and four external 68 pin very high density Ultra3 SCSI connectors |
| P1218A |
-TopTools remote control card with battery (Version 2.0) - Allows emergency remote access using LAN or modem |
| D9351A |
-NetRAID-4m four-channel disk array controller with 128MB cache - PCI board with two internal 68 pin high density and four external 68 pin very high density Ultra3 SCSI connectors |
| D9161A |
-NetRAID-4m four-channel disk array controller with 64MB cache - PCI board with two internal 68 pin high density and four external 68 pin very high density Ultra3 SCSI connectors |
| D6028A |
-TopTools remote control card with battery (Version 1) - Allows emergency remote access using LAN or modem |
| D6025C |
-Ultra3 SCSI host adapter |
| D6025B |
-Ultra2 SCSI host adapter |
| D5955A |
-NetRAID-3si three-channel disk array controller - PCI board with three internal 68 pin high density and three external 68 pin high density Ultra wide SCSI connectors |
| D5013B |
-PCI 10Base-T/100Base-TX LAN board |
| D2140A |
-NetRAID-1si - One-channel disk array controller - PCI board with one internal 68 pin high density and one external 68 pin high density Ultra wide SCSI connector |
| D9161-63002 |
-NetRAID 4M daughter board backup battery replacement kit - Includes battery with attached cable and installation instructions |
| P3475A |
-NetRAID-2m dual channel disk array controller with 128MB cache - PCI board with two internal 68 pin high density and four external 68 pin very high density Ultra3 SCSI connectors |
| P3482A |
-Gigabit LAN adapter - PCI-X 10/100/1000TX 3Com LAN card - (3Com 3C996-T) |
| D5955-63003 |
-16MB SIMM memory module for NetRaid 3Si disk array controller |
| D5989C |
-NetServer Storage System/12 - External cabinet which can hold eight half height, or 12 low profile Ultra2 SCSI drives - Includes one Rack Storage 12 Ultra160 SCSI card |
| D5989B |
-NetServer Storage System/12 - External cabinet which can hold eight half height, or 12 low profile Ultra2 SCSI drives - Includes one Rack Storage 12 Ultra2 SCSI card |
| D9142A |
-NetServer LH3000/LH6000 pedestal to rack conversion kit - Includes slide rails, bezels, and accessories |
| D9158A |
-Internal drive capacity upgrade - Adds a secondary mass storage cage for up to six additional drive bays |
| P3475-69003 |
-NetRaid-2M dual-channel disk array controller W/128MB cache - PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors |
| P3413-63001 |
-Ultra160 LVD SCSI adapter board (Adaptec ASC-29160) - 64-bit, 66MHz PCI - External 68-pin High Density LVD connector, internal 68-pin Ultra160 LVD connector, internal 68-pin SE connector, internal 50-pin Narrow SE connector |
| P3411-69004 |
-NetRaid-2M dual-channel disk array controller W/64MB cache - PCI board with two internal 68-pin High Density and two external 68-pin Very High Density Ultra3 SCSI connectors |
| P3410-69003 |
-NetRaid-1M single-channel Ultra3 SCSI disk array controller W/32MB cache - PCI board with one internal 68-pin High Density and one external 68-pin Very High Density Ultra3 SCSI connector |
| D9351-69004 |
-NetRaid-4M four-channel disk array controller W/128MB cache - PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors |
| D9161-69004 |
-NetRaid-4M four-channel disk array controller W/64MB cache - PCI board with two internal 68-pin High Density and four external 68-pin Very High Density Ultra3 SCSI connectors |
| D5013-63003 |
-LAN adapter - PCI 10/100Base-TX LAN board |
| D2140-69004 |
-NetRaid-1Si one-channel disk array controller - PCI board with one internal 68-pin High Density and one external 68-pin Ultra High Density SCSI connector |
| D7132-69000 |
-64MB SIMM memory module for NetRAID 3Si disk array controller |
| D5955-63002 |
-4.8V battery - 650mAh, nickel metal hydride (NiMH) |
| P1756-69006 |
-Voltage regulator module - For Pentium III Coppermine and Xeon processors |
| D8228-63015 |
-Fan assembly - Includes two hot-swap fans mounted on a bracket |
| D8228-63014 |
-Hot-swap fan assembly |
| D8228-63013 |
-Hot-swap fan assembly |
| D8228-63045 |
-Exhaust fan power cable |
| D8228-63043 |
-IDE CD-ROM drive cable (D7) |
| D8228-63041 |
-Management port ribbon cable |
| D8228-63035 |
-Power supply cable assembly - A 22cm (8.7in) cable which has a 24-pin (M) connector and a 20-pin (F) connector connected using two wires to an 11cm (4.3in) cable which has a 24-pin (M) connector and a 24-pin (F) connector |
| D8228-63034 |
-Ribbon cable assembly - Has 30-pin (F) connector to both a 7.8cm (3.1in) cable with DB-15 (F) connector and mounting hardware and a 16.5cm (6.5in) cable with DB-15 (F) connector and mounting hardware |
| D8228-63031 |
-Cable assembly - Has 14-pin (F) connectors - 9.8cm (3.9in) long |
| D8228-63024 |
-PCI hot-plug assembly - Includes shell, PC board, card retainers, latches, and cables |
| D8550A |
-Battery backup module kit - Includes battery module, 15-pin (F) to 15-pin (F) 9.5cm (3.8-inch) cable, 15-pin (F) to 15-pin (F) 40cm (15.5-inch) cable, and installation guide |
| D8550-63001 |
-Battery backup module kit - Includes battery module, 15-pin (F) to 15-pin (F) 9.5cm (3.8-inch) cable, 15-pin (F) to 15-pin (F) 40cm (15.5-inch) cable, and installation guide |
| D8520-63012 |
-3.0V battery - Lithium - Type CR2032 |
| D8228-63016 |
-Tubeaxial fan assembly |
| D8228-63026 |
-PCI card latch (Blue) - Holds in the hot-swap PCI cards |
| D8228-63027 |
-PCI card latch (Gray) - Holds in the PCI cards |
| P1807-69001 |
-Intel Pentium III processor - 933MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) - Includes heat sink |
| D9184-69000 |
-Intel Pentium III processor - 733MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache) - Includes heat sink |
| 5064-6604 |
-Power supply module - 300 watts |
| 8120-1751 |
-Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 120V, 10A in the USA, Canada, Chile, Argentina, and Taiwan) |
| D5955-69001 |
-NetRaid-3Si three-channel disk array controller - PCI board with three internal 68-pin High Density and three external 68-pin High Density Uultra Wide SCSI connectors |
| D8236-69000 |
-System processor board - For up to two PIII processors with 133 MHz FSB - Has four DIMM sockets, and integrated ATI Rage IIc video controller with 2MB SGRAM |
| D8228-69006 |
-Power management/interconnect board - Has connectors for the system processor board, I/O board, IDE drives, and system power connectors |
| D7140-63014 |
-Terminator board - Used in secondary processor socket for a system with only one processor |
| D6028-69002 |
-NetServer remote control board with 4 pin I2C cable |
| C3751-60201 |
-PS/2 two-button serial mouse (Quartz Gray) - Has attached 6ft cable with 6-pin mini-DIN connector |
| D8228-63020 |
-32MB, 100MHz non-ECC SDRAM DIMM memory module |
| D7156-69001 |
-128MB, 100MHz ECC SDRAM DIMM memory module |
| D7155-69001 |
-64MB, 100MHz ECC SDRAM DIMM memory module |
| P1807A |
-Intel Pentium III processor upgrade - Includes one 933MHz (Coppermine, 133MHz front side bus, 256KB Level-2 cache, Slot 1) processor with heat sink and voltage regulator module |
