| D6135A |
-LC2 to LC3 system upgrade - Includes system processor board, one 64MB SDRAM DIMM, NetServer Navigator CD-ROM, and floppy disk - Upgrades LC2 NetServer to LC3 |
| D4992A |
-NetRAID-1 one-channel disk array controller - PCI board with one internal 68 pin high density and one external 68 pin high density Ultra wide SCSI connector |
| D5025A |
-PCI Wide SCSI host adapter board |
| D5955A |
-NetRAID-3si three-channel disk array controller - PCI board with three internal 68 pin high density and three external 68 pin high density Ultra wide SCSI connectors |
| D5955-63003 |
-16MB SIMM memory module for NetRaid 3Si disk array controller |
| D7132-69000 |
-64MB SIMM memory module for NetRAID 3Si disk array controller |
| 5063-8391 |
-Hot Swap drive filler panel (Flint Gray) - For empty Hot-Swap drive slots |
| D2140-69004 |
-NetRaid-1Si one-channel disk array controller - PCI board with one internal 68-pin High Density and one external 68-pin Ultra High Density SCSI connector |
| D4943-69001 |
-NetRaid 3-channel disk array controller - PCI board with 3 internal 68-pin and 2 external 68-pin High Density Ultra Wide SCSI connectors |
| D4943A |
-NetRAID 3-Channel disk array controller - PCI board with 3 internal 68 pin and 2 external 68 pin high density Ultra wide SCSI connectors, manual, and NetServer Navigator CD-ROM |
| D2140A |
-NetRAID-1si - One-channel disk array controller - PCI board with one internal 68 pin high density and one external 68 pin high density Ultra wide SCSI connector |
| D2035B |
-1.44MB, 3.5-inch floppy drive (Flint Gray bezel) |
| D4903A |
-4.2GB hot-swap Ultra Wide SCSI hard drive module - 10,000 RPM |
| D4910A |
-4.2GB Wide Single-Ended SCSI hard drive - 7,200 RPM |
| D4911A |
-9.1GB Ultra Wide SCSI hard drive module - 7,200 RPM |
| D5039A |
-18.2GB hot-swap Ultra Wide SCSI hard drive module - 7,200 RPM |
| D6019A |
-9.1GB hot-swap Ultra SCSI hard drive module - 10,000 RPM |
| D7049A |
-9.1GB Ultra Wide SCSI hard drive - 10,000 RPM, 3.5-inch form factor |
| D7176A |
-18.2GB Ultra Wide SCSI hard drive - 7,200 RPM, 3.5-inch form factor |
| D4992-69001 |
-NetRaid-1 one-channel disk array controller - PCI board with one internal 68-pin High Density and one external 68-pin High Density Ultra Wide SCSI connector |
| D5025-63001 |
-Wide SCSI host adapter PCI board |
| D2140-63004 |
-16MB SIMM memory module for NetRAID 1Si |
| C3751-60201 |
-PS/2 two-button serial mouse (Quartz Gray) - Has attached 6ft cable with 6-pin mini-DIN connector |
| C3751B |
-2 button PS/2 serial mouse (Quartz Gray) - Has attached 6ft cable with 6-pin mini-din connector |
| D7032A |
-Intel Pentium II processor upgrade - Includes one 450MHz (Deschutes, 512KB Level-2 cache, Slot 1) processor |
| D3604B |
-NetServer Storage System/6 - External cabinet which can hold up to two half-height non-hot-swap Fast SCSI-2 drives and up to six hot-swap drive modules - Includes cabinet with 6 bays, 2 common tray shelves, dual SCSI backplane, and redundant power s |
| D5989B |
-NetServer Storage System/12 - External cabinet which can hold eight half height, or 12 low profile Ultra2 SCSI drives - Includes one Rack Storage 12 Ultra2 SCSI card |
| D5989C |
-NetServer Storage System/12 - External cabinet which can hold eight half height, or 12 low profile Ultra2 SCSI drives - Includes one Rack Storage 12 Ultra160 SCSI card |
| J1474A |
-8-port Console Switch - Connect up to eight computers to a single monitor, keyboard, and mouse - Includes rack mounting hardware - Must order connecting cables separately |
| D6025C |
-Ultra3 SCSI host adapter |
| D6025B |
-Ultra2 SCSI host adapter |
| D5955-69001 |
-NetRaid-3Si three-channel disk array controller - PCI board with three internal 68-pin High Density and three external 68-pin High Density Uultra Wide SCSI connectors |
| C1556D |
-24GB external SureStore DAT 24e Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive |
| 5002-3748 |
-Mounting tray for 5.25-inch drives |
| C2260-60078 |
-Drive mounting tray (Dove Gray) - For mounting a 3.5-inch hard disk drive in a 5.25-inch drive bay - Includes tray, front bezel, and status cable with LED |
| D2198B |
-Hard drive mounting tray kit (package of 3) |
| D3349A |
-Hot swap drive module tray kit - Parchment White |
| D2199A |
-Drive mounting tray kit - 5.25-inch wide tray for 5.25-inch removable media drives (and hard drives in some cases) - Package of 3 trays with instructions and screws |
| D5968A |
-Wide SCSI cable kit - Internal cable connected to controller board - Contains one cable for NetServer LCII and one cable for NetServer E-series |
| C5677B |
-6x12/24GB SureStore DAT 24x6i Single-Ended Narrow SCSI-2 internal autoloader DDS-3 (DAT) tape drive |
| C4395B |
-10/20GB SureStore T20e Single-Ended Narrow SCSI-2 external Travan TR-5 tape drive - Includes power supply, cables, tape, and software |
| C4394B |
-10/20GB SureStore T20i Single-Ended Narrow SCSI-2 internal Travan TR-5 tape drive - Includes tape and software |
| 5063-8389 |
-5.25-inch filler panel (Quartz Gray) - For empty 5.25-inch drive bays above the Hot-Swap drive bay |
| 5064-4635 |
-Pedestal base (Foot) - For tower-style computer |
| 5041-5340 |
-I/O board retainer - Used to hold add-in boards in place |
| D5955-63002 |
-4.8V battery - 650mAh, nickel metal hydride (NiMH) |
| C1528-69204 |
-8GB SureStore DAT8i DDS-2 tape drive |
| D2035-60282 |
-1.44MB, 3.5-inch floppy drive (Flint Gray) - 1/3 height |
| D3583-69004 |
-4.2GB hot-swap Ultra SCSI hard drive module |
| D4289-69001 |
-9.1GB hot-swap Ultra SCSI-2 hard drive module (Quartz Gray) |
| 5064-3503 |
-Hot swap bezel lock |
| 5182-4534 |
-Key - Drive lock |
| 5064-3501 |
-System board stiffener bracket - Metal bracket with board extractors that mounts to the top of the system board |
| 5063-5671 |
-Hot swap cage assembly - Holds hot swap drives and PCA |
| 5183-2472 |
-Heat sink clip |
| 5064-1986 |
-Side cover assembly |
| 5064-1987 |
-Top cover assembly |
| 5042-2163 |
-Board guide for ISA and PCI boards (Large plastic piece) |
| 5042-2110 |
-Fastener - Plastic rivet |
| 5183-2471 |
-Heat sink for Pentium II processors |
| D4389-60091 |
-IDE CD-ROM drive - 48X CD-ROM read (Mitsumi CRMC-FX4820T) - Has front panel headphone jack and volume control |
| D4903-69001 |
-4.2GB hot-swap Ultra Wide SCSI hard drive module - 10,000 RPM |
| C1528K |
-8GB SureStore DAT 8i Single-Ended Narrow SCSI-2 DDS-2 DAT tape drive |
| C1529K |
-8GB external SureStore DAT 8e Single-Ended Narrow SCSI-2 DDS-2 DAT tape drive |
| C1555D |
-24GB internal SureStore DAT 24i Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive (Flint) |
| C1555DR |
-24GB SureStore DAT 24i Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive |
| C1556DR |
-24GB external SureStore DAT 24e Single-Ended Narrow SCSI-2 DDS-3 DAT tape drive |
| C1559C |
-6x12/24GB external SureStore DAT 24x6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive |
| C1559D |
-6x12/24GB external SureStore DAT 24x6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive |
| C1559DR |
-6x12/24GB external SureStore DAT 24x6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive |
| P1215-69001 |
-18GB Ultra3 SCSI hard drive - 7,200 RPM, 3.5-inch form factor, 1.0-inch high - Comes mounted on a drive tray |
| P1214-69002 |
-9GB Ultra3 SCSI hard drive module - 10000 RPM, 3.5in form factor, low profile |
| D4910-69001 |
-4.2GB Ultra Wide SCSI hard drive - 7,200 RPM |
| D4911-69001 |
-9.1GB Ultra Wide SCSI hard drive module - 7,200 RPM |
| D5039-69001 |
-18.2GB hot-swap Ultra Wide SCSI hard drive module - 7,200 RPM |
| D6019-69002 |
-9.1GB hot-swap Ultra Wide SCSI hard drive module - 10,000 RPM, SCA 80-pin connector |
| D7049-69001 |
-9.1GB Ultra Wide SCSI hard drive module - 10,000 RPM |
| D7176-69001 |
-18.2GB Wide Single-Ended SCSI hard drive - 7,200 RPM |
| P1167-69002 |
-18.2GB Ultra3 Wide SCSI LVD hard drive module - 10,000 RPM, 3.5-inch form factor, 1.0-inch high (Seagate ST318404LW) |
| P1213-69001 |
-9GB Ultra3 SCSI hard drive - 7,200 RPM, 3.5-inch form factor, 1.0-inch high |
| 5064-1961 |
-Front bezel assembly |
| C2260-60078 |
-Drive mounting tray (Dove Gray) - For mounting a 3.5-inch hard disk drive in a 5.25-inch drive bay - Includes tray, front bezel, and status cable with LED |
| D2198A |
-Hard drive mounting tray kit (package of 3) - For mounting a 3.5-inch hard disk drive in a 5.25-inch drive bay - Includes tray, Dove Gray front panel, mounting screws, and status cable with LED |
| D2198B |
-Hard drive mounting tray kit (package of 3) |
| D3349A |
-Hot swap drive module tray kit - Parchment White |
| D3349B |
-Hot swap drive module tray kit - Quartz gray |
| 9300-1609 |
-Antistatic ESD (electrostatic discharge) workstation kit - For working on ESD sensitive boards |
| Q2004A |
-DLTtape IV bar code labels - Package of 100 data cartridge labels and 10 cleaning labels |
| J1456B |
-NetServer LCIIs rack mount kit - Rack mount one or two LCIIs - Contains stationary base, dual sliding shelves, blank panel, and ear panels for the column - (Quartz Gray) |
| 5011-1941 |
-Diagnostic assistant disk for NetServers LH,LS,LC,LF and LPr |
| 5065-7470 |
-HP NetServer Navigator CD-ROM (Revision M.04.05) |
| 92283L |
-DDS cartridge storage box - Includes security lock and file hanger adapter - Holds up to 12 cartridges |
| 199704-001 |
-DLT cleaning cartridge - Not for DLT 1 or DLT VS |
| 211087-001 |
-12GB (24GB with 2:1 compression) DDS-3 125m tape cartridge |
| 217861-B21 |
-DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of 21 tapes |
| J1488A |
-2.0m 19in bare rack cabinet - Has vented top, anti tip foot, 3in heavy duty casters, and 4 leveler screws - Quartz Gray |
| J1487B |
-2.0m 19in rack cabinet - Has vented top, side panels, vented rear door, anti tip foot, 3in heavy duty casters, and 4 leveler screws - Quartz Gray |
| J2585B |
-PCI 32-BIT LAN interface board - Has RJ-45 connector - Supports both EtherTwist (10Base-T) and 100VG/802.12 |
| P1218A |
-TopTools remote control card with battery (Version 2.0) - Allows emergency remote access using LAN or modem |
| P3482A |
-Gigabit LAN adapter - PCI-X 10/100/1000TX 3Com LAN card - (3Com 3C996-T) |
| D2140-69004 |
-NetRaid-1Si one-channel disk array controller - PCI board with one internal 68-pin High Density and one external 68-pin Ultra High Density SCSI connector |
| D4943-69001 |
-NetRaid 3-channel disk array controller - PCI board with 3 internal 68-pin and 2 external 68-pin High Density Ultra Wide SCSI connectors |
| D4992-69001 |
-NetRaid-1 one-channel disk array controller - PCI board with one internal 68-pin High Density and one external 68-pin High Density Ultra Wide SCSI connector |
| J2585-69011 |
-32-bit PCI LAN interface board - RJ-45 connectors - Supports both EtherTwist 10Base-T and 100VG/802.12 |
| J1487A |
-2.0m 19in rack cabinet - Has vented top, side panels, solid rear door, anti tip foot, 3in heavy duty casters, and 4 leveler screws - Quartz Gray |
| 217862-B22 |
-DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of 315 tapes |
| 242781-001 |
-Cleaning cartridge - For DDS (DAT) tape drives |
| C5706-60010 |
-DDS-1 90m tape cartridge - 2GB native capacity (4GB with 2:1 compression) |
| C5706A |
-2GB (4GB with 2:1 compression) DDS-1 90m tape cartridge |
| C5707-60010 |
-4GB (8GB with 2:1 compression) DDS-2 120m tape cartridge |
| C5707A |
-4GB (8GB with 2:1 compression) DDS-2 120m tape cartridge |
| C5708-60010 |
-12GB (24GB with 2:1 compression) DDS-3 125m tape cartridge |
| C5708A |
-12GB (24GB with 2:1 compression) DDS-3 125m tape cartridge |
| C5709-60010 |
-Cleaning cartridge - For DDS (DAT) tape drives |
| C5709A |
-Cleaning cartridge - For DDS (DAT) tape drives |
| C5142-60010 |
-DLT cleaning cartridge - Not for DLT 1 or DLT VS |
| C5141L |
-DLTtape IV pre-labeled tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Includes bar code label |
| 295192-B21 |
-DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of seven tapes |
| 295194-B21 |
-DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives |
| 295515-B21 |
-12GB (24GB with 2:1 compression) DDS-3 125m tape cartridge - Package of 10 tapes |
| 9164-0358 |
-2GB (4GB with 2:1 compression) DDS-1 90m tape cartridge |
| 9164-0723 |
-DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives |
| C5141-60010 |
-DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives |
| C5141F |
-DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives |
| C5141FL |
-DLTtape IV pre-labeled tape cartridges - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Includes bar code labels - Package of 20 pre-labeled tapes |
| D6028A |
-TopTools remote control card with battery (Version 1) - Allows emergency remote access using LAN or modem |
| D5013A |
-PCI 10Base-T/100Base-TX LAN board |
| D6138A |
-AC adapter for Netserver TopTools remote control card |
| A7861-65452 |
-USB keyboard assembly (Carbon Black, 104 key layout) - Has attached 2.9m (9.5ft) cable with USB connector (Taiwan - Traditional Chinese) |
| D6097-69001 |
-64MB, 100MHz registered ECC SDRAM DIMM memory module |
| D6098-69001 |
-128MB, 100MHz registered ECC SDRAM DIMM memory module |
| D6099-69001 |
-256MB, 100MHz registered ECC SDRAM DIMM memory module |
| 1818-6527 |
-512kB, 50ns EDO VRAM video memory IC |
| D6097A |
-64MB, 100MHz registered ECC SDRAM DIMM module |
| D6098A |
-128MB, 100MHz registered ECC SDRAM DIMM module |
| D6099A |
-256MB, 100MHz registered ECC SDRAM DIMM module |
| A7861-65450 |
-USB keyboard assembly (Carbon Black, 106 key layout) - Has attached 2.9m (9.5ft) cable with USB connector (Korean) |
| 5064-3531 |
-Processor fan and bracket assembly |
| 5184-3872 |
-Adapter - 68-pin high density female to 50-pin female - Used to connect 68-pin male ribbon cable to 50-pin male Narrow SCSI device |
| C5710A |
-Adapter - 68-pin high density female to 50-pin female - Used to connect 68-pin male ribbon cable to 50-pin male Narrow SCSI device |
| 1420-0559 |
-3.6V battery - 2.1Ah, lithium |
| 234556-001 |
-3.0V internal lithium battery - 200mAh (type CR2032) - For the real time clock (RTC) |
| D6123-60001 |
-LC3 BIOS ROM chip |
| 5182-6730 |
-Ribbon cable - 3-pin (F) connector to 3-pin (F) connector - 40cm (15.8in) long |
| 5064-1979 |
-Control panel - Includes indicator lights and front panel buttons - Mounts on the Black plastic PCI/ISA board guide |
| 5064-1954 |
-System fan |
| 5183-3418 |
-Terminator board - Used in secondary processor socket for a system with only one processor |
| D6123-69000 |
-System processor board - For up to two PII/PIII processors |
| 8120-4753 |
-Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 100V in Japan) |
| 5064-1941 |
-Power supply assembly - 350 watts |
| 1821-4608 |
-Intel Pentium II processor - 350MHz (Deschutes, 100MHz front side bus, 512KB Level-2 cache, Slot 1) |
| D6092-69000 |
-Intel Pentium II processor - 400MHz (Deschutes, 100MHz front side bus, 512KB Level-2 cache, SECC-2, Slot 1) - Includes heat sink |
| D7032-69000 |
-Intel Pentium II processor - 450MHz (Deschutes, 100MHz front side bus, 512KB Level-2 cache, Slot 1, ECC) - Includes heat sink |
| D7129-69001 |
-Intel Pentium III processor - 500MHz (Katmai, 100MHz front side bus, 512KB Level-2 cache, Slot 1) - Includes heat sink |
| D8583-69000 |
-Intel Pentium III processor - 550MHz (Katmai, 100MHz front side bus, 512KB Level-2 cache, Slot 1) - Includes heat sink |
| 0950-2848 |
-Voltage regulator module (VRM, VXI/Celestica 073-20740-30) - 5VDC input, 2VDC output, 19A - For Pentium II processor |
| 8120-4211 |
-Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in South Africa and India) |
| 8120-2956 |
-Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Denmark) |
| D6123-69001 |
-System backplane board - Has sockets for add-in ISA or PCI boards |
| D5013-63003 |
-LAN adapter - PCI 10/100Base-TX LAN board |
| J2585-69011 |
-32-bit PCI LAN interface board - RJ-45 connectors - Supports both EtherTwist 10Base-T and 100VG/802.12 |
| 8120-1351 |
-Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei) |
| 8120-1369 |
-Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China) |
| 8120-1689 |
-Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam) |
| 8120-1751 |
-Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 120V, 10A in the USA, Canada, Chile, Argentina, and Taiwan) |
| 8120-2104 |
-Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Switzerland) |
| 5064-4688 |
-Adapter - 68-pin high density (F) to 50-pin (F) - Used to connect 68-pin (M) ribbon cable to 50-pin (M) Narrow SCSI device |
