| D6128A |
-Hot swap drive tray - For low-profile Ultra2 SCSI SCA disk drive |
| C5171J |
-SureStore 7215we 15 slot DLT library - Includes two Fast Wide SCSI DLT 7000 drives, cosmetic panels, three magazines, barcode reader, and accessories |
| C5175F |
-SureStore 4228w 28 slot DLT library with multiple Wide Differential SCSI buses - Includes two DLT 4000 drives |
| C5175J |
-SureStore 7228w 28 slot DLT library with multiple Wide Differential SCSI buses - Includes two DLT 7000 drives |
| C5177F |
-SureStore 4448w 48 slot DLT library with multiple Wide Differential SCSI buses - Includes four DLT 4000 drives |
| C5177J |
-SureStore 7448w 48 slot DLT library with multiple Wide Differential SCSI buses - Includes four DLT 7000 drives |
| C5647A |
-20/40GB SureStore DLT 40i Single-Ended Narrow SCSI-2 internal DLT drive |
| C5658A |
-70GB SureStore DLT 70e Single-Ended Wide SCSI-2 external DLT drive |
| C5677B |
-6x12/24GB SureStore DAT 24x6i Single-Ended Narrow SCSI-2 internal autoloader DDS-3 (DAT) tape drive |
| C5171F |
-SureStore 4215WE 15 slot DLT library - Includes two Fast Wide SCSI DLT 4000 drives, cosmetic panels, three magazines, barcode reader, and accessories |
| C5170J |
-SureStore 7115WE 15 slot DLT library - Includes one Fast Wide SCSI DLT 7000 drive, cosmetic panels, three magazines, barcode reader, and accessories |
| C1555B |
-12/24GB SureStore DAT 24i Single-Ended Narrow SCSI-2 DAT drive |
| C1556B |
-12/24GB external SureStore DAT 24e Single-Ended Narrow SCSI-2 DAT tape drive |
| C1559C |
-6x12/24GB external SureStore DAT 24x6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive |
| C1559D |
-6x12/24GB external SureStore DAT 24x6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive |
| C1559DR |
-6x12/24GB external SureStore DAT 24x6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive |
| C1579A |
-20/40GB external SureStore DLT 40e Single-Ended Narrow SCSI-2 DLT tape drive |
| C1579AR |
-20/40GB external SureStore DLT 40e Single-Ended Narrow SCSI-2 DLT tape drive |
| C5170F |
-SureStore 4115we 15 slot DLT library - Includes one Fast Wide SCSI DLT 4000 drive, cosmetic panels, three magazines, barcode reader, and accessories |
| C5726A |
-80GB SureStore DLT80E Low Voltage Differential SCSI external DLT drive |
| C5726AR |
-80GB SureStore DLT80E Low Voltage Differential SCSI external DLT drive |
| D3604B |
-NetServer Storage System/6 - External cabinet which can hold up to two half-height non-hot-swap Fast SCSI-2 drives and up to six hot-swap drive modules - Includes cabinet with 6 bays, 2 common tray shelves, dual SCSI backplane, and redundant power s |
| D3604BR |
-NetServer Storage System/6 - External cabinet which can hold up to two half-height non-hot-swap Fast SCSI-2 drives and up to six hot-swap drive modules - Includes cabinet with 6 bays, 2 common tray shelves, dual SCSI backplane, and redundant power s |
| D4902A |
-NetServer Rack Storage System/8 - Rack mounted cabinet which can hold up to eight hot-swap drive modules - Includes rack optimized storage cabinet (3U high) with eight hot pluggable bays, dual SCSI backplane, redundant hot swap power supply, and fans |
| 5002-3748 |
-Mounting tray for 5.25-inch drives |
| C2260-60078 |
-Drive mounting tray (Dove Gray) - For mounting a 3.5-inch hard disk drive in a 5.25-inch drive bay - Includes tray, front bezel, and status cable with LED |
| D2198A |
-Hard drive mounting tray kit (package of 3) - For mounting a 3.5-inch hard disk drive in a 5.25-inch drive bay - Includes tray, Dove Gray front panel, mounting screws, and status cable with LED |
| D2198B |
-Hard drive mounting tray kit (package of 3) |
| D6127A |
-Hot swap drive tray - For half-height Ultra2 SCSI SCA disk drive |
| D7176A |
-18.2GB Ultra Wide SCSI hard drive - 7,200 RPM, 3.5-inch form factor |
| D7049A |
-9.1GB Ultra Wide SCSI hard drive - 10,000 RPM, 3.5-inch form factor |
| C6280F |
-SureStore 418 8 slot DLT autoloader - Includes one Ultra SCSI DLT 4000 drive, six cartridge magazines, SCSI cable and terminator, and five data cartridges |
| D2035B |
-1.44MB, 3.5-inch floppy drive (Flint Gray bezel) |
| D4383B |
-IDE CD-ROM drive with integral loading tray - 24X CD-ROM read |
| D4910A |
-4.2GB Wide Single-Ended SCSI hard drive - 7,200 RPM |
| D4911A |
-9.1GB Ultra Wide SCSI hard drive module - 7,200 RPM |
| D6104A |
-4.2GB hot-swap Ultra2 SCSI hard drive module - 7,200 RPM, low profile |
| D6506A |
-IDE CD-ROM drive with integral loading tray - 24X CD-ROM read - Package of 10 drives |
| D7031A |
-18.2GB hot-swap Ultra2 Wide SCSI hard drive module - 10,000 RPM, half height |
| C1529H |
-4/8GB external SureStore DAT 8e Single-Ended Narrow SCSI-2 DAT tape drive |
| C1528H |
-4/8GB SureStore DAT 8i Single-Ended Narrow SCSI-2 DAT tape drive |
| P1217-69001 |
-9.1GB hot-swap Ultra3 SCSI hard drive module - 7,200 RPM, low profile - Includes drive, hot-swap tray, SCA extender, and bezel spacer |
| 5064-7906 |
-Cover - Installed over the I/O board side of the cabinet |
| 5002-5191 |
-Handles - For rack mount version |
| 5183-2471 |
-Heat sink for Pentium II processors |
| 5064-7086 |
-Nameplate - NetServer LH3 series logo (rack mount) |
| 5064-6118 |
-HP NetServer LH3R rack mount rail |
| D6077-69000 |
-Hot swap mass storage cage assembly with PC boards |
| D2035-60282 |
-1.44MB, 3.5-inch floppy drive (Flint Gray) - 1/3 height |
| D4389-60091 |
-IDE CD-ROM drive - 48X CD-ROM read (Mitsumi CRMC-FX4820T) - Has front panel headphone jack and volume control |
| 5064-4694 |
-Cover - Large cover installed on both sides of a pedestal version or top and bottom of a rack mount version |
| 5064-4693 |
-Cover - Installed over the system board side of the chassis |
| 5064-7050 |
-Main bezel (rack mount version) - Covers the front of the NetServer - Includes mounting hardware and latch |
| 5064-7084 |
-Main bezel (pedestal version) - Covers the front of the server |
| 5064-9001 |
-Main bezel (rack mount version) - Low profile - Covers the front of the server |
| 5064-6605 |
-Power supply cage - Does not include power supply |
| 1490-1007 |
-5.08cm (2.0-in) swivel caster (with mounting plate) |
| 5182-9416 |
-Fixed caster (with locking lever) |
| 5042-2144 |
-Latch clip |
| 5183-2472 |
-Heat sink clip |
| D4910-69001 |
-4.2GB Ultra Wide SCSI hard drive - 7,200 RPM |
| D4911-69001 |
-9.1GB Ultra Wide SCSI hard drive module - 7,200 RPM |
| D9421-69001 |
-18.2GB hot-swap Ultra3 SCSI hard drive module - 15,000 RPM, low profile - Includes drive, hot-swap tray, SCA extender, and bezel spacer |
| P1167-69002 |
-18.2GB Ultra3 Wide SCSI LVD hard drive module - 10,000 RPM, 3.5-inch form factor, 1.0-inch high (Seagate ST318404LW) |
| P1168-69003 |
-9.1GB hot-swap Ultra3 SCSI hard drive module - 10,000 RPM, low profile - Includes drive, hot-swap tray, SCA extender, and bezel spacer |
| P1169-69002 |
-36.4GB Ultra3 Wide SCSI LVD hard drive module - 10,000 RPM (Seagate ST336704LW) |
| P1213-69001 |
-9GB Ultra3 SCSI hard drive - 7,200 RPM, 3.5-inch form factor, 1.0-inch high |
| P1214-69002 |
-9GB Ultra3 SCSI hard drive module - 10000 RPM, 3.5in form factor, low profile |
| P1215-69001 |
-18GB Ultra3 SCSI hard drive - 7,200 RPM, 3.5-inch form factor, 1.0-inch high - Comes mounted on a drive tray |
| P1216-69001 |
-18.2GB hot-swap Ultra3 SCSI hard drive module - 7,200 RPM, low profile - Includes drive, hot-swap tray, SCA extender, and bezel spacer |
| D9419-69002 |
-36.4GB hot-swap Ultra3 SCSI hard drive module - 10,000 RPM, low profile - Includes drive, hot-swap tray, SCA extender, and bezel spacer |
| D7176-69001 |
-18.2GB Wide Single-Ended SCSI hard drive - 7,200 RPM |
| D6104-69001 |
-4.2GB hot-swap Ultra2 SCSI hard drive module - 7,200 RPM |
| D6106-69001 |
-9.1GB hot-swap Ultra2 SCSI hard drive module - 7,200 RPM, low profile - Includes drive, hot-swap tray, SCA extender, and bezel spacer |
| D6107-69001 |
-9.1GB hot-swap Ultra2 SCSI hard drive module - 10,000 RPM, low profile - Includes drive, hot-swap tray, SCA extender, and bezel spacer |
| D6108-69001 |
-18.2GB hot-swap Ultra-2 SCSI hard drive module - 7,200 RPM, half height - Includes drive, hot-swap tray, SCA extender, and bezel spacer |
| D7031-69001 |
-18.2GB hot-swap Ultra-2 SCSI hard drive module - 10,000 RPM, half height |
| D7049-69001 |
-9.1GB Ultra Wide SCSI hard drive module - 10,000 RPM |
| D7174-69000 |
-18GB hot-swap Ultra2 SCSI hard drive module - 7,200 RPM - Includes drive, hot-swap tray, SCA extender, and bezel spacer |
| D7175-69000 |
-18.2GB hot-swap Ultra2 SCSI hard drive module - 10,000 RPM - Includes drive, hot-swap tray, SCA extender, and bezel spacer |
| 5064-4639 |
-Front panel assembly bezel - Mounts over the control panel |
| E7680A |
-PDU switch kit - Includes remote switch panel, PDU switch module with two C20 (M) plugs for power input and two C19 (F) plugs for power output - 200-240V, 16A for each circuit |
| E7806A |
-Power cord - 4.5m (14.8ft) long - Has a stripped end for power input and a straight C19 (F) receptacle for power output |
| E7808A |
-Power cord (Black) - 15 AWG, 4.5m (14.8ft) long - Has IEC-309 (M) plug for power input and straight (F) C19 receptacle (for 220V in Denmark and Switzerland) |
| E7809A |
-Power cord - Has CEE 7/7 (M) plug for power input and C19 (F) plug for power output - 4.5m (14.8ft) long |
| D6094B |
-NetServer LH3/LH4 pedestal to rack conversion kit - Includes slide rails, bezels, and accessories |
| J1492A |
-External mass storage rack mount kit (Quartz Gray) - Mount one or two systems side by side - Has two sliding shelves, solid base, and bezel |
| J1492B |
-HP systems storage/6 rack kit, 11 EIA (Quartz Gray) - Mount one or two systems side by side - Has two sliding shelves, solid base, bezel, rail spacers for Rack System/E and /U |
| J1519A |
-Universal monitor rack mount kit - For any monitor up to 19-inch and 100 pounds - Quartz Gray |
| J1519B |
-Universal monitor rack mount kit (Quartz Gray) - For any monitor up to 19-inch (max height 46cm (18.1-inches)) and 100 pounds |
| J1520A |
-Stationary shelf for Rack System/E or Rack System/U |
| J1516A |
-Rail spacer kit - Includes four spacers and mounting hardware - Used with Rack System/E or Rack System/U when installing narrow legacy products |
| J1512B |
-Tie kit for Rack System - Used to attach two E41 or U41 cabinets together |
| J1513B |
-Tie kit for Rack System/E33 or U33 - Used to attach two E33 or U33 cabinets together |
| E7805A |
-PDU power cord - Has L6-30P (M) plug for power input and C19 (F) plug for PDU power output - 4.5m (14.8ft) long |
| E7804A |
-PDU power cord - Has C20 (M) plug for power input and C19 (F) plug for PDU power output - 4.0m (13.1ft) long - 240V, 16A |
| 8120-1348 |
-Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has 5-15P (M) plug and straight C13 (F) receptacle (for 120V in the United States and Canada) |
| 8120-1575 |
-Daisy-chain power cord (Jade Gray) - 18AWG, 76cm (30in) long - Has (M) C14 plug for power input and (F) C13 plug for power output |
| 8120-4540 |
-Power cord - Has 5-15P (M) plug for power input and C13 (F) plug for power output - 125V, 10A, 1.8m |
| 8120-6357 |
-Power cord (Black) - 15 AWG, 2.5m (8.2ft) long - Has un-terminated (M) end for direct connection or customer installed plug for power input, and straight (F) C19 receptacle for power output (for International use) |
| 8120-6362 |
-Power cord (Black) - 2.5m (8.2ft) long - Has (M) NEMA L6-20P plug for power input, and (F) C19 receptacle for power output (for 120V in the United States, Canada, Thailand, Philippines and Japan) |
| 8120-6903 |
-Power cord (Black) - 12 AWG, 4.5m (14.8ft) long - Has NEMA L6-20P locking-type male plug, and IEC C19 straight female receptacle (for 250VAC in the United States, Canada, and Japan) - (Feller & Neumayer L6/20-SJT3X12AWG-C19/4.5M) |
| 8120-8351 |
-Power cord (Black) - 12 AWG, 2.4m (8.0ft) long - Has (M) L6-30P plug for power input, and straight (F) C19 receptacle for power output |
| E7742A |
-Jumper (daisy chain) power cord for rack cabinets - 240V, 10A - Has C14 (M) plug for power input and C13 (F) plug for power output - 2.5m (8.2ft) long |
| E7743A |
-PDU Power cord - 120V, 10A - 2.5m (8.2ft) long with 5-15P (M) plug and straight C13 (F) receptacle (USA and Canada) |
| E7798A |
-PDU power cord - Has C20 (M) plug for power input and C19 (F) plug for PDU power output - 2.5m (8.2ft) long - 240V, 16A |
| E7802A |
-PDU power cord - Has (M) 5-20P plug for power input and (F) C19 plug for PDU power output - 4.5m (14.8ft) long |
| E7803A |
-Power cord (Black) - 15 AWG, 4.5m (14.8ft) long - Has NEMA L6-20P (M) plug for power input and (F) C19 receptacle for power output (for the United States, Canada, and Japan) |
| J1518A |
-Rack mounted retractable tray for keyboard and mouse - Quartz Gray |
| E7679A |
-PDU switch kit - Includes remote switch panel, PDU switch module with two C20 (M) plugs for power input and two C19 (F) plugs for power output - 100-127V, 16A for each circuit |
| C5708A |
-12GB (24GB with 2:1 compression) DDS-3 125m tape cartridge |
| C5709-60010 |
-Cleaning cartridge - For DDS (DAT) tape drives |
| C5709A |
-Cleaning cartridge - For DDS (DAT) tape drives |
| C2790A |
-Ballast used to provide stability to equipment racks - 30lb |
| J1464A |
-Rack system/U25 - 1.25m 19in 25U rack cabinet - Has vented top, vented rear door, side cover panels, cable guide, front/back anti-tip foot, castors, leveling feet |
| J1466A |
-Rack system/U33 - 1.6m 19in 33U rack cabinet - Has vented top, vented rear door, side cover panels, cable guide, front/back anti-tip foot, castors, leveling feet |
| J1500A |
-Rack system/E41 - 1.96m 19in 41U rack cabinet - Has vented top, vented rear door, front/back anti-tip foot, castors, leveling feet |
| J1500B |
-Rack system/E41 - 1.96m 19in 41U rack cabinet - Has vented top, vented rear door, front/back anti-tip foot, castors, leveling feet |
| C5708-60010 |
-12GB (24GB with 2:1 compression) DDS-3 125m tape cartridge |
| C5707A |
-4GB (8GB with 2:1 compression) DDS-2 120m tape cartridge |
| C5141-60010 |
-DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives |
| C5141F |
-DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives |
| C5141FL |
-DLTtape IV pre-labeled tape cartridges - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Includes bar code labels - Package of 20 pre-labeled tapes |
| C5141L |
-DLTtape IV pre-labeled tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Includes bar code label |
| C5142-60010 |
-DLT cleaning cartridge - Not for DLT 1 or DLT VS |
| C5706-60010 |
-DDS-1 90m tape cartridge - 2GB native capacity (4GB with 2:1 compression) |
| C5706A |
-2GB (4GB with 2:1 compression) DDS-1 90m tape cartridge |
| C5707-60010 |
-4GB (8GB with 2:1 compression) DDS-2 120m tape cartridge |
| J1501A |
-Rack system/E33 - 1.6m 19in 33U rack cabinet - Has vented top, vented rear door, front/back anti-tip foot, castors, leveling feet |
| J1501B |
-Rack system/E33 - 1.6m 19in 33U rack cabinet - Has vented top, vented rear door, front/back anti-tip foot, castors, leveling feet |
| E7723B |
-Cable guide for equipment racks - Mounts horizontally or vertically on rear columns of rack - 19in, package of 2 |
| J1522A |
-Hardware kit for equipment racks - Includes ten decorative mounting screws, ten T25 Torx non-decorative mounting screws, and 20 sheet metal nuts |
| J1521A |
-Lifting hooks for Rack System/E or Rack System/U - Package of four hooks |
| J1514A |
-1U rackmount filler panels - For covering the empty slots on the front of the rack cabinet - Package of 6 panels |
| E7670A |
-10A power distribution unit (PDU) - Has one C14 (M) power input and ten C13 (F) power outlets - For 100-240V |
| E7671A |
-16A power distribution unit (PDU) - Has one C20 (M) for power input, six C13 (F) power outlets, and two C19 (F) power outlets - For 100-240V |
| E7672A |
-Dual power distribution unit (PDU) kit - Includes a 16A PDU, (E7671A), a 10A PDU (E7670A), and the power cord (E7742A) used to connect the E7670A to the E7671A - For 100-240V |
| E7675A |
-16A power distribution unit (PDU) - Has one C20 (M) for power input, one C13 (F) outlet, and nine 5-15R (F) outlets - For 100-127V |
| E4471A |
-Cabinet fan assembly - 240VAC - Two fans mounted on a plate |
| E4470A |
-Cabinet fan assembly - 120VAC - Two fans mounted on a plate |
| J1502A |
-Rack system/E25 - 1.25m 19in 25U rack cabinet - Has vented top, vented rear door, front/back anti-tip foot, castors, leveling feet |
| J1502B |
-Rack system/E25 - 1.25m 19in 25U rack cabinet - Has vented top, vented rear door, front/back anti-tip foot, castors, leveling feet |
| J1506A |
-Side cover kit for Rack System/E41 Cabinet - Includes eight 8U panels and two 9U panels - Panels are snap on/off molded plastic |
| J1507A |
-Side cover kit for Rack System/E33 or U33 Cabinet - Includes six 8U panels and two 9U panels - Panels are snap on/off molded plastic |
| J1508A |
-Side cover kit - Includes four 8U panels and two 9U panels - Panels are snap on/off molded plastic |
| J1509A |
-Perforated, lockable front door for Rack System/E41 or /U41 |
| J1510A |
-Perforated, lockable front door for Rack System/E33 or U33 |
| J1511A |
-Perforated, lockable front door for Rack System/E25 or U25 |
| 9164-0723 |
-DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives |
| 9164-0358 |
-2GB (4GB with 2:1 compression) DDS-1 90m tape cartridge |
| 295515-B21 |
-12GB (24GB with 2:1 compression) DDS-3 125m tape cartridge - Package of 10 tapes |
| D5013BV |
-PCI 10Base-T/100Base-TX LAN board |
| D5955A |
-NetRAID-3si three-channel disk array controller - PCI board with three internal 68 pin high density and three external 68 pin high density Ultra wide SCSI connectors |
| D6028A |
-TopTools remote control card with battery (Version 1) - Allows emergency remote access using LAN or modem |
| J2585B |
-PCI 32-BIT LAN interface board - Has RJ-45 connector - Supports both EtherTwist (10Base-T) and 100VG/802.12 |
| P1218A |
-TopTools remote control card with battery (Version 2.0) - Allows emergency remote access using LAN or modem |
| P3482A |
-Gigabit LAN adapter - PCI-X 10/100/1000TX 3Com LAN card - (3Com 3C996-T) |
| D5955-63003 |
-16MB SIMM memory module for NetRaid 3Si disk array controller |
| D7132-69000 |
-64MB SIMM memory module for NetRAID 3Si disk array controller |
| D5013A |
-PCI 10Base-T/100Base-TX LAN board |
| D4992AV |
-NetRAID-1 one-channel disk array controller - PCI board with one internal 68 pin high density and one external 68 pin high density Ultra wide SCSI connector |
| D7015A |
-LH3 to LH4 system upgrade - Includes two 450 MHz Pentium II Xeon processors with 1MB L2 cache, 256MB (4x64mb) DRAM, two processor terminator boards, and four voltage regulator modules |
| D7083A |
-LH3 to LH4 system upgrade - Includes two 400 MHz Pentium II Xeon processors with 512K L2 cache, 256MB (4x64mb) DRAM, two processor terminator boards, and four voltage regulator modules |
| D7102A |
-LH3 to LH4 system upgrade - Includes two 400 MHz Pentium II Xeon processors with 1MB L2 cache, 256MB (4x64mb) DRAM, two processor terminator boards, and four voltage regulator modules |
| D7112A |
-LH3 to LH4 system upgrade - Includes two 500 MHz Pentium III Xeon processors with 1MB L2 cache, 256MB (4x64mb) DRAM, two processor terminator boards, and four voltage regulator modules |
| D6138A |
-AC adapter for Netserver TopTools remote control card |
| D5955-63002 |
-4.8V battery - 650mAh, nickel metal hydride (NiMH) |
| D4282B |
-Cable kit - Two internal SCSI cables and one adapter - Used with HP NetRAID-3si disk array controller |
| D4992A |
-NetRAID-1 one-channel disk array controller - PCI board with one internal 68 pin high density and one external 68 pin high density Ultra wide SCSI connector |
| D4992-69001 |
-NetRaid-1 one-channel disk array controller - PCI board with one internal 68-pin High Density and one external 68-pin High Density Ultra Wide SCSI connector |
| D5955-69001 |
-NetRaid-3Si three-channel disk array controller - PCI board with three internal 68-pin High Density and three external 68-pin High Density Uultra Wide SCSI connectors |
| 92283L |
-DDS cartridge storage box - Includes security lock and file hanger adapter - Holds up to 12 cartridges |
| 199704-001 |
-DLT cleaning cartridge - Not for DLT 1 or DLT VS |
| 211087-001 |
-12GB (24GB with 2:1 compression) DDS-3 125m tape cartridge |
| 217861-B21 |
-DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of 21 tapes |
| 217862-B22 |
-DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of 315 tapes |
| 242781-001 |
-Cleaning cartridge - For DDS (DAT) tape drives |
| 295192-B21 |
-DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of seven tapes |
| 295194-B21 |
-DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives |
| 5065-7470 |
-HP NetServer Navigator CD-ROM (Revision M.04.05) |
| 5011-1941 |
-Diagnostic assistant disk for NetServers LH,LS,LC,LF and LPr |
| J2585-69011 |
-32-bit PCI LAN interface board - RJ-45 connectors - Supports both EtherTwist 10Base-T and 100VG/802.12 |
| Q2004A |
-DLTtape IV bar code labels - Package of 100 data cartridge labels and 10 cleaning labels |
| C5148F |
-5 slot removable DLT magazine pre-loaded with 5 DLTape IV tape cartridges |
| C5148FR |
-5 slot removable DLT magazine pre-loaded with 5 DLTape IV tape cartridges |
| C5149F |
-Empty 5 slot removable DLT magazine |
| C6280-60026 |
-Empty six slot removable DLT magazine |
| C6288J |
-Empty 6 slot removable DLT magazine |
| C6289J |
-6 slot removable DLT magazine pre-loaded with 6 DLTape IV tape cartridges |
| D7007A |
-Intel Pentium II Xeon processor upgrade - Includes one 400MHz (512KB Level-2 cache, Slot 2) processor |
| D6119A |
-Intel Pentium II Xeon processor upgrade - Includes one 400MHz (1MB Level-2 cache, Slot 2) processor |
| D5000-69001 |
-I/O board - Contains ISA and PCI accessory slots |
| D5000-69002 |
-Power management PC board |
| D2140-69004 |
-NetRaid-1Si one-channel disk array controller - PCI board with one internal 68-pin High Density and one external 68-pin Ultra High Density SCSI connector |
| D4992-69001 |
-NetRaid-1 one-channel disk array controller - PCI board with one internal 68-pin High Density and one external 68-pin High Density Ultra Wide SCSI connector |
| D5013-63003 |
-LAN adapter - PCI 10/100Base-TX LAN board |
| D5955-69001 |
-NetRaid-3Si three-channel disk array controller - PCI board with three internal 68-pin High Density and three external 68-pin High Density Uultra Wide SCSI connectors |
| D5990-69000 |
-Fiber channel array - Redundant module with two fiber channel ports and two very high density 68-pin SCSI connectors |
| J2585-69011 |
-32-bit PCI LAN interface board - RJ-45 connectors - Supports both EtherTwist 10Base-T and 100VG/802.12 |
| D5000-69000 |
-System processor board - With Super VGA, IDE, dual Ultra2 SCSI controllers, Ultra2 to Single-Ended SCSI converter |
