| J2577-69001 |
-EISA 32-bit LAN interface board - Has two RJ-45 connectors - One 10M bits/s 10Base-T and one 100M bits/s 100VG/802.12 |
| D3578A |
-32MB, 70nS, 36-bit parity SIMM memory module |
| D3592-69001 |
-16MB manageable ECC-on-SIMM (EOS) memory module |
| D3593-69001 |
-32MB manageable ECC-on-SIMM (EOS) memory module |
| D3597-69001 |
-8MB manageable ECC-on-SIMM (EOS) memory module |
| C3751-60201 |
-PS/2 two-button serial mouse (Quartz Gray) - Has attached 6ft cable with 6-pin mini-DIN connector |
| 1420-0513 |
-4.5V battery pack - 600mAh, alkaline battery pack - Includes cable |
| 3160-1004 |
-Tubeaxial fan with sensor (NMB Technologies 3610KL-04W-B49-P01) - 92mm x 92mm x 25mm thick, 12VDC, 2,850 RPM, 1.35CFM - Includes cable assembly |
| A7861-65450 |
-USB keyboard assembly (Carbon Black, 106 key layout) - Has attached 2.9m (9.5ft) cable with USB connector (Korean) |
| D3578-69001 |
-32MB, 70nS, 36-bit parity SIMM memory module |
| D3577-69001 |
-8MB, 70nS, 36-bit parity SIMM memory module |
| D2297A |
-16MB, 70nS, 36-bit parity SIMM memory module |
| D2974A |
-4MB, 70nS, 36-bit parity SIMM memory module |
| D3577A |
-8MB, 70nS, 36-bit parity SIMM memory module |
| D3592A |
-16MB manageable ECC-on-SIMM (EOS) memory module |
| D3593A |
-32MB manageable ECC-on-SIMM (EOS) memory module |
| D3597A |
-8MB manageable ECC-on-SIMM (EOS) memory module |
| D2297-69001 |
-16MB, 70nS, 36-bit SIMM memory module |
| D2974-63001 |
-4MB, 70nS, 36-bit parity SIMM memory module |
| A7861-65452 |
-USB keyboard assembly (Carbon Black, 104 key layout) - Has attached 2.9m (9.5ft) cable with USB connector (Taiwan - Traditional Chinese) |
| D3350-69004 |
-System (Mother) board - With VGA, IDE and two Narrow SCSI-2 controllers |
| 1821-2294 |
-Intel Pentium processor - 100MHz (P54) |
| D2967-63214 |
-7.2V batter - Nickel cadmium (NiCd) |
| D2078B |
-EISA 32-Bit fast SCSI-2 host bus adaptor |
| D2967C |
-Remote assistant board - Not for Canada/USA - Intelligent EISA based remote management board with onboard nickel cadmium (NiCd) battery and processor - Does NOT include a modem |
| D2968C |
-Remote assistant board - Intelligent EISA based remote management board with onboard nickel cadmium (NiCd) battery, processor, and modem (Canada and USA) |
| J2585B |
-PCI 32-BIT LAN interface board - Has RJ-45 connector - Supports both EtherTwist (10Base-T) and 100VG/802.12 |
| D2967-69004 |
-Remote assistant assembly - For outside of Canada/US - Without on-board modem |
| D2968-69005 |
-Remote assistant PC board assembly - Canada/US - With on-board modem |
| 5064-0795 |
-Autoranging power supply - 100-240VAC input, 350 watts - For worldwide use |
| 8120-4211 |
-Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in South Africa and India) |
| D3356-69001 |
-Processor board with a single socket for a 133MHz Pentium processor and six SIMM sockets |
| C3610-69050 |
-Dual channel PCI Fast Wide SCSI disk array controller board |
| 8120-1351 |
-Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei) |
| 8120-1369 |
-Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China) |
| 8120-1689 |
-Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam) |
| 8120-1751 |
-Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 120V, 10A in the USA, Canada, Chile, Argentina, and Taiwan) |
| 8120-2104 |
-Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Switzerland) |
| 8120-2956 |
-Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Denmark) |
| D3588-60001 |
-NetServer LH cable kit - For adding drives or reconfiguring the system - Includes internal (C2) and backplane (C4) fast wide cables, and CD-ROM (C6) and external (C7) narrow cables |
| D2199A |
-Drive mounting tray kit - 5.25-inch wide tray for 5.25-inch removable media drives (and hard drives in some cases) - Package of 3 trays with instructions and screws |
| D3349B |
-Hot swap drive module tray kit - Quartz gray |
| 5063-5671 |
-Hot swap cage assembly - Holds hot swap drives and PCA |
| 5064-7985 |
-SCSI-2 CD-ROM drive (Flint Gray) - 32X CD-ROM read - Has loading tray |
| D2035-60282 |
-1.44MB, 3.5-inch floppy drive (Flint Gray) - 1/3 height |
| D2076-69002 |
-1GB Fast SCSI-2 hard drive - 3.5-inch form factor, low profile |
| D2077-69001 |
-2.0GB SCSI-2 hard drive - 5,400 RPM, 3.5-inch form factor |
| D2388-69001 |
-270MB IDE hard drive - 3.5-inch form factor |
| D3341-69001 |
-4.0GB SCSI-2 hard drive - 5,400 RPM, 3.5-inch form factor |
| D3581-69001 |
-1.05GB hot-swap Fast SCSI-2 hard drive module (Parchment White) |
| 5182-4564 |
-Narrow SCSI-2 ribbon cable - Includes built-in terminator |
| 5182-4535 |
-Ribbon cable assembly - 3-pin (F) connector to 3-pin (F) connector - 30cm (11.8in) long |
| 5002-3243 |
-Bracket for NetServer CPU card - Attaches to processor board |
| 5063-0384 |
-Chassis cover - Includes front, top and both sides |
| 5002-3205 |
-System board extender (metal bracket) |
| 5041-1082 |
-Rubber foot - Replacement rubber foot for the bottom of the computer (two used) |
| 5063-5697 |
-EISA slot card guide |
| 1205-0832 |
-Heat sink - With spring clip - For pin grid array type processor IC - Black, 58.1mm x 48.0mm and 31.75mm high |
| 5064-0715 |
-Hard drive tray bezel (Flint Gray) - For 3.5-inch hard drives |
| 5182-4523 |
-Fast Wide internal SCSI cable - 68-pin (M) to 68-pin (M) - 23cm (9in) long |
| D3582-69001 |
-2.1GB hot-swap SCSI-2 hard drive module (Dove Gray) |
| D3582-69002 |
-2.1GB hot-swap hard drive module (Flint Gray) |
| D3583BR |
-4.2GB hot-swap Fast SCSI-2 hard drive module (Flint Gray) |
| 5182-4534 |
-Key - Drive lock |
| 5063-5676 |
-Filler panel (Dove Gray) - Covers the empty Hot-Swap drive slots |
| 5063-8389 |
-5.25-inch filler panel (Quartz Gray) - For empty 5.25-inch drive bays above the Hot-Swap drive bay |
| C3310-69155 |
-Dual channel EISA Fast SCSI-2 disk array controller board |
| 5002-3748 |
-Mounting tray for 5.25-inch drives |
| C2260-60078 |
-Drive mounting tray (Dove Gray) - For mounting a 3.5-inch hard disk drive in a 5.25-inch drive bay - Includes tray, front bezel, and status cable with LED |
| D2198B |
-Hard drive mounting tray kit (package of 3) |
| D3583A |
-4.2GB hot-swap Fast SCSI-2 hard drive module (Parchment White) |
| D3582A |
-2.1GB hot-swap Fast SCSI-2 hard drive module (Dove Gray) |
| D3582-69004 |
-2.1GB hot-swap Ultra SCSI hard drive module (Quartz Gray) |
| D3583-69000 |
-4.2GB hot-swap Ultra SCSI hard drive module - 7,200 RPM |
| D3583-69001 |
-4.2GB hot-swap SCSI-2 hard drive module (Parchment White) |
| D3583-69002 |
-4.2GB hot-swap SCSI-2 hard drive module (Flint Gray) |
| D3583-69004 |
-4.2GB hot-swap Ultra SCSI hard drive module |
| D4289-69001 |
-9.1GB hot-swap Ultra SCSI-2 hard drive module (Quartz Gray) |
| D3341A |
-4.0GB Fast SCSI-2 hard drive - 3.5-inch form factor |
| D3581A |
-1.05GB hot-swap Fast SCSI-2 hard drive module (Parchment White) |
| 5063-0381 |
-Bezel assembly - Plastic cover over the control panel PC board has cut outs for switches and LED activity lights |
| J2585-69011 |
-32-bit PCI LAN interface board - RJ-45 connectors - Supports both EtherTwist 10Base-T and 100VG/802.12 |
| D3353-80208 |
-Self paced training kit for NetServer LH series - Includes student workbook, service manual, and test return envelope |
| 9300-1609 |
-Antistatic ESD (electrostatic discharge) workstation kit - For working on ESD sensitive boards |
| 8710-1944 |
-IC (integrated circuit) extraction tool - For removing the processor |
| 5964-3199 |
-HP NetServer service and support CD-ROM - Covers LC, LE, LF, LH, LH plus, LH pro, LM, LS, and LX. |
| 5967-1566 |
-HP NetServer Accessories service handbook bundle (September 1997) - Three volume set includes NetServer Systems, System Accessories, and Rack Systems |
| D3353-80207 |
-HP NetServer LH series service manual |
| 92192X |
-1.42/1.44MB 3.5in high-density disks (Unformatted) (10/BOX) |
| D4922-63001 |
-Firmware/software upgrade kit - Required when upgrading from the D2967A/B to the D2967C Remote Assistant assembly |
| 5960-6642 |
-Additional self paced training test - Contains 1 test |
